Part Number Hot Search : 
MS6502 SE1020W GBJ8005 FT10010 AM29L 33HSD ST75185C MAX519
Product Description
Full Text Search
 

To Download MBRB3030CTL Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 MBRB3030CTL
Vishay High Power Products
Schottky Rectifier, 2 x 15 A
FEATURES
* 150 C TJ operation
Base common cathode 2
* Center tap configuration * Very low forward voltage drop * High frequency operation * High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance * Guard ring for enhanced ruggedness and long term reliability * Designed and qualified for Q101 level
D2PAK
1 Anode 1
2 Common cathode
3 Anode 2
DESCRIPTION PRODUCT SUMMARY
IF(AV) VR 2 x 15 A 30 V
This center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 s sine 15 Apk, TJ = 125 C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 30 30 1100 0.34 - 55 to 150 UNITS A V A V C
VOLTAGE RATINGS
PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM MBRB3030CTL 30 UNITS V
ABSOLUTE MAXIMUM RATINGS
PARAMETER Maximum average forward current See fig. 5 per leg IF(AV) per device 5 s sine or 3 s rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 121 C rectangular waveform 30 A 1100 360 13 3 mJ A SYMBOL TEST CONDITIONS VALUES 15 UNITS
Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg
TJ = 25 C, IAS = 3 A, L = 2.9 mH Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical
Document Number: 93461 Revision: 21-Aug-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 1
MBRB3030CTL
Vishay High Power Products Schottky Rectifier, 2 x 15 A
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL 15 A Maximum forward voltage drop per leg See fig. 1 VFM
(1)
TEST CONDITIONS TJ = 25 C
VALUES 0.47 0.55 0.34 0.45 2 183 0.22 6.76 2840 8.0 10 000
UNITS
30 A 15 A 30 A
V
TJ = 125 C VR = Rated VR
Maximum reverse leakage current per leg See fig. 2 Threshold voltage Forward slope resistance Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 s, duty cycle < 2 %
IRM (1) VF(TO) rt CT LS dV/dt
TJ = 25 C TJ = 125 C TJ = TJ maximum
mA V m pF nH V/s
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C Measured lead to lead 5 mm from package body Rated VR
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case Typical thermal resistance, case to heatsink Approximate weight minimum maximum Case style D2PAK per leg per package SYMBOL TJ, TStg RthJC RthCS DC operation Mounting surface, smooth and greased TEST CONDITIONS VALUES - 55 to 150 2.0 1.0 0.50 2 0.07 6 (5) 12 (10) g oz. kgf * cm (lbf * in) C/W UNITS C
Mounting torque Marking device
MBRB3030CTL
www.vishay.com 2
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93461 Revision: 21-Aug-08
MBRB3030CTL
Schottky Rectifier, 2 x 15 A Vishay High Power Products
1000
1000
IR - Reverse Current (mA)
TJ = 150 C
100
IF - Instantaneous Forward Current (A)
100
TJ = 125 C
10
TJ = 100 C TJ = 75 C TJ = 50 C
10
TJ = 150 C TJ = 125 C TJ = 25 C
1
0.1
TJ = 25 C
1
0.01
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
0
5
10
15
20
25
30
VFM - Forward Voltage Drop (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg)
VR - Reverse Voltage (V)
Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg)
10 000
CT - Junction Capacitance (pF)
TJ = 25 C
1000
100
0 5 10 15 20 25 30 35
VR - Reverse Voltage (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)
ZthJC - Thermal Impedance (C/W)
10
1
PDM t1
0.1 Single pulse (thermal resistance)
D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20
t2
Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC
0.01 0.00001
0.0001
0.001
0.01
0.1
1
10
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Document Number: 93461 Revision: 21-Aug-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 3
MBRB3030CTL
Vishay High Power Products Schottky Rectifier, 2 x 15 A
150
16
Allowable Case Temperature (C)
140
Average Power Loss (W)
DC
130
12
D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75
8
RMS limit
120
Square wave (D = 0.50) 80 % Rated VR applied
4
DC
110
See note (1)
100
0
0 5 10 15 20 25 30 0 5 10 15 20 25 30
IF(AV) - Average Forward Current (A)
Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg)
IF(AV) - Average Forward Current (A)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
IFSM - Non-Repetitive Surge Current (A)
1000
At any rated load condition and with rated VRRM applied following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V
D.U.T.
IRFP460 Rg = 25
Current monitor
Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V
(1)
www.vishay.com 4
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93461 Revision: 21-Aug-08
MBRB3030CTL
Schottky Rectifier, 2 x 15 A Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
MBR
1 1 2 3 4 5 6 7 -
B
2
30
3
30
4
CT
5
L
6
TRL
7
8
Schottky MBR series B = D2PAK Current rating (30 = 30 A) Voltage rating (30 = 30 V) CT = Center tap (dual) L = Low VF None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only)
-
8
-
None = Standard production PbF = Lead (Pb)-free (for D2PAK tube) P = Lead (Pb)-free (for D2PAK TRR and TRL)
LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95046 http://www.vishay.com/doc?95054 http://www.vishay.com/doc?95032
Document Number: 93461 Revision: 21-Aug-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com 5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1


▲Up To Search▲   

 
Price & Availability of MBRB3030CTL

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X